Insights
Articles for buyers of made-to-print parts
Short technical and commercial notes for purchasing and supplier-quality engineers at OEM, Tier and gas-equipment manufacturers. The author is SUNHY, not a named individual. Nothing here is a certificate or a case study with invented results.
Thread standards, pitch and gauging on made-to-print fasteners
Metric and inch thread systems, class of fit, and go / no-go gauging before and after coating are taken from the print, not from a catalogue default.
Coatings for high-strength fasteners and hydrogen-embrittlement control
Zinc, zinc-nickel and zinc-flake systems are reviewed when the print calls them up, together with friction, post-coating gauging and any required hydrogen-embrittlement control.
Aluminium diaphragm housings and related aluminium components, made to print
Housings for regulator-stage diaphragms, and related aluminium parts, are quoted as components — not as a complete regulator or station.
Filter closing elements sourced as components, not complete filters
A closing element or related turned accessory can be quoted from the print. A complete filter or station cannot, and should not be implied by the RFQ.
From prototype samples to series production
What to agree before tooling is committed or a process route is changed, and why a machined sample is not approval of the series process.
Documents that can be confirmed per order: EN 10204 3.1, inspection records, PPAP and IMDS
Evidence is confirmed for the order, not assumed. A quality-system certificate is not a blanket mark, and PPAP or IMDS is not automatic.
Weld nuts and special nuts produced from the print
Projection style, thread condition after coating, and installation method have to be on the print — not inferred from a standard nut catalogue.
Materials and finishes commonly specified on European gas-equipment prints
The grades in the 2026 catalogue are examples, not a closed list. The print, not the photograph, decides the alloy and the finish.
Slam-shut valve internals sourced as components, not complete valves
A basket, a trip element or a stem can be quoted from the print. A complete safety shut-off valve cannot, and should not be implied by the RFQ.
Brass connecting stubs and union nuts for gas pressure equipment
CW614N stubs, a cast union-nut example, and steel counterparts — always as accessories, never as a complete regulator or station.
Cold heading versus CNC for automotive fasteners
The M4–M24 heading window, combined routes, and why a machined sample is not a free pass to change the production process later.
What to include in a made-to-print fastener or fittings RFQ
The current drawing revision, material, finish, volume and the documents required — what a complete enquiry needs before a route can be proposed.
Send the print for the part you need quoted.
Use the request form, or email anna@sunhyings.com.