T-nuts, threaded inserts and related special installation nuts are produced from the customer drawing. The slot, the prongs, the cage or the body that locates the nut in the customer’s part have to be on the current revision. A catalogue T-nut, or a photograph of a similar insert, is not substituted for those features, and a type used in a different panel or profile is not assumed to fit.
SUNHY reviews these forms in the special nuts and installation elements family, together with lock nuts, clinch nuts, rivet nuts, cap and security nuts, and other special nuts. The product page lists T-nuts and inserts among the forms that can be reviewed. The part supplied is the nut as drawn. The customer’s profile, wood, composite or metal part, and the method of placing the nut, remain the customer’s process unless a specific trial is agreed in writing.
The locating features are the part
A T-nut is more than a flange and a thread. Prong length and number, barrel length, flange diameter and thickness, and any slot or anti-rotation geometry are drawing-controlled. An insert may have a knurl, a cage, a hex, or a special outline of its own. If those features are missing from the print, they are open items. They are not completed from a supplier catalogue column.
Where the nut has to sit in a stated slot width, a hole, or a cage, those mating dimensions should be on the nut drawing or in an attached specification. “To suit our profile” is not a dimension. If both the nut and the mating profile can be sent, they can be reviewed together; the quotation is still for the nut, not for the customer’s assembly.
Thread, material and finish
The thread system, pitch and class of fit are taken from the print, including the condition in which the thread will be gauged, and after coating if that is required. The general rules are the same as in the note on thread standards, pitch and gauging. A close class of fit in a thin barrel needs to be visible so that the route can be set accordingly.
Material and finish follow the drawing. A carbon steel with a stated coating, a stainless grade such as 304 (A2) or 316 (A4) when specified, or another named grade, is reviewed as written. A zinc coating that is convenient for a heading route is not substituted for a stainless call-out, or the reverse. Property grades, where they appear, are print data, as in the note on property classes.
Route, volume and samples
T-nuts and inserts may be headed, machined, stamped and tapped, or produced by a combined route, depending on the geometry and the volume. The M4–M24 heading window is a review starting point where it applies, not a promise that every T-nut will be headed. The reasoning follows cold heading versus CNC.
A machined or handmade sample can be useful for a fit check in the customer’s profile. It is not approval of the series process. A change of prong geometry, barrel length or route is a process change and is re-validated before serial release — see from prototype samples to series production.
Related installation elements, and the limit of supply
Clinch nuts and rivet nuts, weld nuts, and prevailing-torque lock nuts are related but different families. They are not interchangeable with a T-nut in order to simplify an enquiry. The companion notes on clinch nuts and rivet nuts, weld nuts and special nuts and prevailing-torque and lock nuts should be used when those are the actual parts.
The quotation covers the nut as drawn. Installation into the customer’s part, and any push-out or torque-out test on that part, is included only when the order requires it and the method is defined. Documents such as EN 10204 3.1, inspection records, PPAP or IMDS are confirmed per order, not automatic.
Prongs, thin barrels and the condition after coating
Prongs and thin barrels are easy to distort in coating barrels, in packing, or in a poorly planned secondary operation. If the print gives a limit on prong straightness, barrel roundness or flange flatness, that limit is part of the inspection plan. A coating system is chosen from the specification, not from a process that is merely convenient for a delicate form. When a barrel is thin and the thread class is close, post-coating gauging, if it is required, should be stated so that the route can be set without informal over-tapping.
Packing also matters on these parts. Prongs that hook into one another, or barrels that crush in a deep carton, can arrive outside the print even when they left the machine correctly. If a packing method, a tray, or a maximum pack quantity is already specified, it is followed; if it is not, a method can be proposed for agreement, as in the note on packing, labelling and lot traceability. A photograph of a standard carton is not, by itself, a method for a pronged T-nut.
What to write in the RFQ
Send the current revision and include the locating features (prongs, slot, cage or outline), the thread, the material and finish, the volume, and the documents or tests you need. If a mating profile drawing exists, attach it for information. Use the request form or email anna@sunhyings.com. A wider list of enquiry items is in what to include in a made-to-print RFQ.
This article is a capability and commercial note. It is not a certificate, a dimensional data book, or evidence of customer approval. Catalogue type codes and example grades do not replace the customer’s item number, material specification or drawing revision.