Steel connecting stubs and threaded adapters on this site are accessories for gas pressure equipment, produced from the customer drawing. They are not a complete regulator, filter or station, and an RFQ should not be written as if they were. The material, the thread, the sealing faces and the finish are taken from the current revision. Catalogue examples — including S355J2 stubs and the G 3/4 threaded-adapter example SH-ST-TA-034 — illustrate capability. They are not a stock list and they do not replace the customer’s item number.

SUNHY reviews steel connecting stubs and steel threaded adapters alongside the related brass accessories described in the note on brass connecting stubs and union nuts. A steel part and a brass part at the same interface are still two drawings; one is not quoted as a material variant of the other unless the print says so.

What the catalogue examples actually are

The steel examples on the product pages typically use S355J2 or S355J2+N and a zinc-plated finish, with pipe threads such as G 3/4 or, on some stubs, G 5/4 (G 1¼). Those grades, finishes and threads are examples of what can be reviewed. A different steel, a different coating, or a different thread system is reviewed when the drawing specifies it. “Like SH-ST-TA-034, but in stainless” is not a complete instruction; the current print for that item is.

Length, hex or spanner flats, bore, sealing face and any shoulder or undercut are taken from the same revision. A photograph or a rendered model does not fix those dimensions, and colour in a model does not represent the specified material or finish.

A component, not a complete device

The scope of supply is the stub or the adapter as drawn. SUNHY does not manufacture complete regulators, slam-shut valves, filters or stations. An enquiry that asks for “a steel inlet for our regulator” still has to come with the component drawing. Type approval, PED assembly approval or a station test is not implied by the manufacture of an accessory, and it is not offered as a blanket claim. The same limit of supply is stated on the other gas-equipment articles on this site.

Related components on the same programme — a union nut, a brass stub, a filter closing element, or a housing — can be reviewed as separate items, each from its own print.

Threads, seats and finish

Pipe threads on these parts are call-outs, not a default interface. The thread system, size and class, and the condition in which the thread will be gauged, including after coating, have to be written on the print. That subject is developed in the note on pipe threads on gas-equipment components and in the general note on thread gauging.

Sealing faces, chamfers and bores are inspected as specified. Zinc plating, where it is used, follows the specification on the drawing; it is a common example on the steel pages, not an automatic finish. Other systems are reviewed when they are named. Materials and finishes more generally are discussed in materials and finishes on European gas-equipment prints.

Route, documents and inspection

These parts are typically machined or formed as the print and the volume require. A change of route is a process change and is re-validated before serial release. Inspection follows the drawing: threads, faces, hex dimensions, coating where specified, and any additional checks the order names.

EN 10204 3.1, inspection records or other documents are confirmed per order, not automatic. A material certificate has to match the grade on the print, for example S355J2 when that is what the revision states — see matching the material grade to the certificate.

Hex, length, bores and how the part will be held

Across-flats size, the length of the hex or the spanner flats, overall length, and the bore — including any steps, intersections or undercuts — are controlled features when the print states them. They are as much a part of the review as the thread. A hex that is convenient for a collet is not substituted for the across-flats on the drawing, and a bore is not enlarged to make machining easier. If a face must be square to a thread, or a bore concentric with a seat, that relationship is inspected when it is specified.

How the part is held in production is a process decision, but it must not erase a feature. A gripping surface that would bruise a sealing face, or a second operation that would leave an unmarked zone the print does not allow, has to be planned out of the route. Those process choices are stated when they affect a characteristic; they are not hidden behind a catalogue example such as SH-ST-TA-034 or a related stub. If a second operation is required, it is part of the agreed route, not an informal extra.

What to write in the RFQ

Send the current revision for the stub or adapter you need quoted, and state the material, the thread, the finish, the volume and the documents you need. Do not describe a complete regulator or station as the item to be manufactured. Use the request form or email anna@sunhyings.com. A wider list of enquiry items is in what to include in a made-to-print RFQ.

This article is a capability and commercial note. It is not a certificate, a dimensional data book, or evidence of customer approval. Catalogue type codes and example grades do not replace the customer’s item number, material specification or drawing revision.